   |
USB Smart Card Reader and Programmer
$29.95
Currently only available in the Blue CyberFrog casing (left top)
with a USB connector (left bottom).
| The ACR30
is a compact, very cost-effective, single chip smart card reader which supports all MCU-based
smart cards with T=0 or T=1 protocols as well as the popular memory cards in the
market today. It is ISO 7816-1/2/3 compliant, EMV and Microsoft PC/SC
certified, and supports all major PC platforms.
Being a single-chip smart card solution, this smart card reader is one of the most
cost-effective solutions for e-commerce, information security, access
control, identification, and other smart card applications. It is currently available
in USB interface:
ACR30U.
The USB smart card reader ACR30U is available in the new CyberFrog casing.
This is an ideal solution for easily integrating smart card access
into any application. The module retains the full functionalities of the
smart card reader / writer, and can be easily integrated in payphones, parking meters,
vending machines, laundries,gaming machines, ATM's, sophisticated access
control systems,and more. |
|
| Standard
features for the ACR30 smart card reader series: |
- ISO 7816-1/2/3 and PC/SC Compliant
- Certified by CE, FCC, EMV and Microsoft WHQL
- Read and write ALL microcontroller smart cards with T=0 and
T=1 protocols
- Read and write the popular memory smart card types in the market:
- Siemens: SLE4406, SLE4418, SLE4428,SLE4432, SLE4442
- Atmel: AT88SC06, AT24C01-16
- STMicroelectronics: ST1305, ST14C02C, ST14C04C
Note: Smart Card manufacturers using the above-mentioned
chips may have different names for their
cards. These cards are likewise supported by ACR30.
Examples are:
- Gemplus: GPM103, GFM2K, GFM4K, GPM2K, GPM8K
- Schlumberger: Primeflex Store 2K/8K, Open 2K/4
- Interface library for efficient PC application smart
card software
development
- 32-bit DLL files for Windows 95, 98,Me, NT and 2000
- PC/SC compliant IFD handler
- Compatible with most PC platforms: Windows 95, 98, Me,
NT and 2000, Linux
|
| Technical
Specifications: |
| Interface |
RS-232 (Serial)
or USB |
| Supply Voltage |
Regulated 5V
DC |
| Supply Current |
<100mA (without
smart card) |
| Operating Temperature |
0 - 50 °C |
| CLK Frequency |
3.68 / 4 MHz |
| Standards / Certifications |
ISO 7816-1/2/3,
PC/SC, CE, FCC |
| Operating System
Support |
Windows 95,
98, Me, NT and 2000, Linux |
|
The PC/SC Driver can be
downloaded here.
You will need the free Acrobat Reader to view this manual.
The smart card reader manual can be found
here.
Click the Buy Now link below to Order your
USB interface Smart Card Reader and Smart Card Programmer.
|
