HOME ABOUT US SEARCH FAQs LINKS SHOP ONLINE

Smart Card Kits       Smart Card Readers        - USB Interface        - Serial Interface       Smart Card Selection       Chip Programmer       Microchip PIC Chips       Digital Camera Memory        - Compact Flash Card        - Secure Digital Card        - MultiMedia Cards        - xd Picture Cards        - Memory Stick        - Card Readers Username Password Forgot password? Enter email to subscribe for updates on Products and Services

Smart Card and Smart Card Reader Frequently Asked Questions Post a Question Please click on a question to study the question and answer. To post a question, click on the link "Post a Question". Q: The LED in my smart card reader is not lighting up. It appears that I can not get power to my ACR30S smart card reader. How can I tell if the smart card reader is functioning properly. A: Please follow the install instructions Here. Once you have followed the install, you can run the sample applications as listed. A common misconception is that the LED will light up once power is applied to the smart card reader. This is not the case, the LED only lights up when a session is started with the smart card through one of the supported protocols. These are the PC/SC driver or the proprietary driver. Frequently Asked Questions Do you ship to foreign country address. e.g Malaysia or Singapore? If you do, what are terms and requirements. Thanks. Can I place my order over the phone or do you only accept web orders? I just purchased one of your USB smart card readers ACR30U. Do you have an online installation and setup manual available? What is the average cost of a smart card? This is an assignment for school, so all information on a smart card would also be helpful. I seem to have something out of whack with the smart card driver. I have a ACR30U, with W2K. It was working but now when I try to run I am getting a diagnostic message "Microsoft Smart Card Resource manager is not activated". If I go into the services and try to manually start the Smart Card resource manager I get a "error 1068 dependency service or group failed to start". But if I look at the dependcies tab it shows no dependicies. Any suggestions on what I can try? Thanks. Do you print on the cards or allow the customers to submit custom 4 color artwork? The ACR30U reader/programmer can be used to read cards and program them? (store information?). Do you have an API and documentation for it? Do you supply the documentation? If I buy a kit for test purposes (card reader and a couple of cards) will I receive the needed documentation to program it? If so, I'll be interested in testing such solutions for future use in applications. Do all countries have track No for shipping ? Need some information. I have a ms access database for my clients and we would like to burn smart cards for each of my clients with their particular info. Can the smart card development ac kit take ms access database as an input file and with limited instructions allow us to produce ouput that we can burn into a smart card, please advise, I am not fammiliar with smart card programming. How do you assign a com port to a ACR30U Smart Card Reader? My program can not find the USB connected reader because it is not on a serial port. How to access 4 ACR30U Smart Card Readers in a PC? Where I can get the API? The LED in my smart card reader is not lighting up. It appears that I can not get power to my ACR30S smart card reader. How can I tell if the smart card reader is functioning properly. Does your Products work with Linux (RedHat) ? What does stored value mean with relation to a smart card? Will your smart card logon kit work with an internal reader? It also states that it locks up your computer when the card is removed. Does this stop ALL programs running or, for example, would your current download continue? Do you have a pinout for your smart cards? I have tried to install this smart card reader three times each time receiving resource manager error 1068 "dependency service could not start". I tried to uninstall and reinstall the drivers and it still hasn't worked. What do you suggest? Where can I get a driver for my reader model AR30U-CFC. I bought the acr30u. Do you have any programs, or know of any, that can read/write raw data to and from the card. I have spent hours looking and am getting no where. I would like to read the data in binary, hex or any format and write to the card using the same format. I have a GemPlus USB Smart card reader. The model number is GCR435. Which smart cards work with this reader? Which smart card would work the best for logging in to Windows XP/2003? Thanks [ 1 ][ 2 ]

Copyright 2003 Didya.com

| Contact Us | Site Map | Policies |